Waterproof test equipment is mainly used to test waterproof products such as mobile phone communication products, watches, hardware and electronic products. The test principle is mainly to conduct waterproof standard experiments with the help of waterproof test equipment to simulate the waterproof function.The correct maintenance of waterproof test equipment is very necessary. Specific steps are as follows:

1. Clean the probe: Use the attached protective cover to prevent dust, water vapor and grease from blocking the probe. Before using this instrument, please check whether there is no dust or grease on the probe and protective cover.

(1) Push down the protective cover

(2) Clean the protective cover with industrial towels or compressed air.

(3) If the probe itself is very dirty, you can immerse it in a mild detergent such as alcohol for a few seconds, and then clean it with compressed air or industrial towels. It is strictly forbidden to use gasoline, turpentine, mineral oil and other solvents to avoid reducing the sensitivity of the instrument.

2. Probe replacement: The probe will eventually fail and needs to be replaced. Since the life of the probe is directly related to the conditions of use and frequency of use, it is difficult to predict the exact replacement time. When an alarm is issued or unstable in pure air, the probe should be replaced. The specific detection steps are as follows:

(1) Confirm that the instrument is turned off

(2) Counterclockwise

(3) Unscrew the old probe. Tighten the spare probe provided in the box clockwise.

Advantages of waterproof test equipment

1. Multiple languages ​​and measurement unit options, optional Chinese interface.

2,135o ionization deflection (natural focus) brand new mass spectrometry technology, metal sealed structure.

3. New electronic circuit and signal processing design.

4. The detectable leak rate is small, and the sensitivity coverage is up to 12 ranges.

5. Quickly remove helium and react quickly.

6. The test port has high pressure resistance and can realize large leak detection.